It is essential you lubricate all your machines moving parts to allow them to work to their full potential. This gel is perfect for doing so.
Keeping your slush machine lubricated is a critical part of maintaining your equipment.
Rear tank seals requires a lubrication every week as does the orange rubber plunger valve inside the handle using this lubricant product. Failure to do so can cause the handles to snap, seals to dry out and crack which can cause your slush mix to leak.
Lubri-Film Plus is a suitable lubricant to keep your slush machines in good working order.
Instructions of use:
Handles; Remove pin and dissemble the handle Place a drop of lube on your finger Rub into the moving parts and seal Re-assemble the handle back together
Slush Tank; Drain slush product from slush tanks Unclip and remove tank Remove the mixing spindles Remove the large round seals Rinse with warm water and wipe clean then dry Dispense a large drop of lube onto finger pad Rub thoroughly around the rubber seal and plastic tank casing Re-assemble